Crossed roller bearings
Crossed roller bearings are bearings with rollers arranged in vertical directions crossly among inside and outside ring of bearing. Because of this orthogonally arranged cylindrical rollers the bearing accepts all combinations of radial, thrust, and moment loads.
JNT provides a full range of Ball or Rollen slewing bearings with internal, external gearing or without gearing.Normal or double holes, reduced or preloaded clearance up to precision quality class are available. Crossed roller bearings with gear teeth on inner ring or outer ring,and without gear teeth. high accuracy rotation high stiffness receive complicated loads consisting of radial load, axial load, and moment at the same time available from stock
Crossed roller bearings standard series 14(As an alternative to XS-14)
Artikel Nr.
CSA14
CSI14
CSU14
Crossed roller bearings
standard series 14,
lip seals on both sides external geared internal geared non-geared
pitch circle diameter of ball set
from 414 mm to 1094 mm
from 414 mm to 1094 mm
from 414 mm to 1094 mm
Crossed roller bearings (As an alternative to XA,XI,XU)
Artikel Nr.
CA
CI
CU
Crossed roller bearings
lip seals on both sides external geared internal geared non-geared
pitch circle diameter of ball set
from 235 mm to 352 mm
288 mm
from 77 mm to 515 mm
Crossed roller bearings
for high precision; dimension series 18 to DIN 616(As an alternative to SX0118)
Artikel Nr.
SC0118
Crossed roller bearings for high precision; dimension series 18 to DIN 616
Bore diameter
from 70 mm to 500 mm
Crossed roller bearings
for high precision, standard series 08(As an alternative to XSU08)
Artikel Nr.
CSU08
standard series 08, without gear teeth, lip seals/lamellar seals on both sides
